Opportunities / HOMELAND SECURITY, DEPARTMENT OF

DRYDOCK: USCGC DILIGENCE DDL FY27

Description (excerpt)

SOURCES SOUGHT NOTICE USCGC DILIGENCE (WMEC 616) DRYDOCK REPAIRS FY27 70ZU0127DILIGENCEDDL This is a SOURCES SOUGHT NOTICE / REQUEST FOR INFORMATION; not a pre-solicitation notice or solicitation for proposals/quotations. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) determine if sources capable of satisfying the agency's requirements exists, (2) determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements, and (3) determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, CG-SEA-C21 Norfolk, VA to identify sources capable of providing the following: DRYDOCK REPAIRS SPECIFICATION: (Subject to change at the discretion of the Government). Contractor shall provide all necessary facilities, materials, equipment, and personnel to perform Drydock Repairs to the U.S. Coast Guard Cutter (USCGC) DILIGENCE (WMEC 616), a 210-foot A-Class, Medium Endurance Cutter. The vessel is home ported in Pensacola, FL. All work will be performed at the contractor’s facility. There is no geographical restriction for this cutter. SCOPE OF WORK: The scope of the acquisition is for the Drydock Repairs of the USCGC DILIGENCE (WMEC 616). This work will include, but is not limited to the following Work Items: WORK ITEM 1: Hull Plating, U/W Body, Ultrasonic Testing WORK ITEM 2: U/W Body, Preserve, 100 percent WORK ITEM 3: Appendages (U/W), Preserve (Internal) and Leak Test WORK ITEM 4: Propulsion Shaft Fairwaters And Rope Guards, Inspect WORK ITEM 5: Voids (Non-Accessible), Preserve (Internal) and Leak Test WORK ITEM 6: Propulsion Shafting, Strain Gauge Alignment, Drydock, Check WORK ITEM 7: Propulsion Shafting; Remove, Inspect, and Reinstall WORK ITEM 8: Propulsion Intermediate Shafts; Remove, Inspect, and Reinstall WORK ITEM 9: Propulsion Shaft Coating, Renew WORK ITEM 10: Propulsion Shafting, Straighten (Optional) WORK ITEM 11: Propeller Shaft Sleeves, Renew WORK ITEM 12: Propulsion Shafting, Optical or Laser Alignment Check (Optional) WORK ITEM 13: Propulsion Shaft Seal (Mechanical And Inflatable) Assemblies, Inspect And Repair Or Renew WORK ITEM 14: Propulsion Shaft Bearings, Extern …

View the official notice on SAM.gov →